Chem Water Solutions

Cationic Flocculant
Polyacrylamide-based flocculants for conditioning a variety of municipal and industrial substrates prior tomechanical or static solid/liquid separation. Highly effective across mechanical dewatering and thickening,flotation, and clarification:??? Available in different molecular weights??? Linear or crosslinked structure??? Exhibit varying degrees of cationic charge??? Supplied as micro bead, free flowing powder, as well as low viscous free flowing liquid in inverse emulsion form 
ANIONIC POWDERPolyelectrolytes for conditioning a wide range ofindustrial effluent applications, supplied as freeflowing powder. Most effective for inorganic anionic substrates, e.g. mineral based, neutralized. May beused for post-coagulation.

Potable Water Gradepolyelectrolytec
oagulant aids for clarification and filtration ofpotable water and for conditioning of potable watersludge prior to thickening and dewatering. Suppliedas free flowing white powder. Also used inprocessing and clarification of sugar beet washingsand raw cane and beet juice. Enables production ofbrilliant juice and high quality sugar.

Organic Coagulant Liquid
Primary coagulant for the clarification of potablewater and a wide range of industrial effluents.Supplied in liquid form. Used to reduce or eliminateprior addition of inorganic coagulants such asaluminium sulphate and ferric sulphate. Magnafloc®LT31 and LT32 also suitable for use in reverseosmosis applications.
Speciality Flocculant
The product is particularly suitable for high biological content, or other difficult to treat substrates, like textile effluent and for colorremoval. 
Defoamer-
Burst defoamers, provide efficient and durable foam control in the different waste water treatment steps.

Cationic Flocculant-
Polyacrylamide-based flocculants for conditioning a variety of municipal and industrial substrates prior to mechanical or static solid/liquid separation. Highly effective across mechanical dewatering and thickening, flotation, and clarification:  Available in different

molecular weights  Linear or crosslinked structure   Exhibit varying degrees of cationic charge  Supplied as micro bead, free flowing powder, as well as low viscous free flowing liquid in inverse emulsion form

Anionic Powder-
Polyelectrolytes for conditioning a wide range ofindustrial effluent applications, supplied as freeflowing powder. Most effective for inorganic anionicsubstrates, e.g. mineral based, neutralized. May beused for post-coagulation. 

Potable Intergrade Polyelectrolyte-
Coagulant aids for clarification and filtration ofpotable water and for conditioning of potable watersludge prior to thickening and dewatering. Suppliedas free flowing white powder. Also used inprocessing and clarification of sugar beet washingsand raw cane and beet juice. Enables production ofbrilliant juice and high quality sugar.

Organic Coagulant Liquid-
Primary coagulant for the clarification of potablewater and a wide range of industrial effluents.Supplied in liquid form. Used to reduce or eliminateprior addition of inorganic coagulants such asaluminium sulphate and ferric sulphate. Magnafloc®LT31 and LT32 also suitable for use in reverseosmosis applications.
Speciality Flocculant-
The product is particularly suitable for high biological content, or other difficult to treat substrates, like textile effluent and for color.

Chemical Nature Copolymer of acrylamide and acrylic acid Application Areas Polyelectrolyte for the conditioning of a variety of municipal and industrial substrates prior to mechanical or static solid/liquid separation.This product is not compliant for use in potable water applications.Benefits Highly effective across a wide range of applications including mechanical dewatering, thickening, flotation, and clarification.Operation over a wide pH range (4-9).Typical Properties Product type: PowderPhysical form: Off-white granular solidAnionic charge: Medium-low Molecular weight: Very high Specific gravity: 0.75Bulk density: 46.8 lb/ft3Ph 1% solution: 6-8Apparent Viscosity/(cP) @ 25 °C Concentration 0.25% 0.50% 1.0%Viscosity 600 1,450 2,000 Storage Under normal storage conditions within the temperature range 5 – 25 °C(41-77 °F) this product will be stable for at least 24 months. Storage outside the above specified temperature range for long periods may adversely affect the product over a long period and should thus be avoided, if possible.It is recommended that stock solutions at 0.25 - 0.5% are prepared regularly and for maximum effect such solutions should be used within 5 days. Beyond this period some loss in efficiency of the product may occur.
Packaging 25 kg Polybag700 kg Small Tay Bag 907 kg Large Tay Bag Shipping and Handling Corrosion towards most standard materials of construction is very low.Stainless steel, fiber glass, polyethylene, polypropylene and epoxycoated surfaces are recommended. In some cases aluminum surfaces can be adversely affected. Spilled product is slippery underfoot, very slippery when wet. Information on the shipping and handling of this product can be found in the relevant MSDS. Disposal of product must comply with all national,state and local laws. Health and Safety Detailed information on this product can be found in the relevant Material Safety Data Sheet (MSDS).Technical Service BASF sales representatives and field service technicians are availableto give advice and assistance in the running of laboratory tests andmachine trials to select the correct product and determine the best application conditions. Note the data contained in this publication is based on our current knowledge and experience. In view of the many factors that may affect processing and application of our product, this data does not relieve processors from carrying out their own investigations and tests; neither does this data imply any guarantee of certain properties, nor the suitability of the product for a specific purpose. Any descriptions,drawings, photographs, data, proportions, weights etc. given here in may change without prior information and do not constitute the agreed contractual quality of the product. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

High molecular weight polyacrylamide based flocculant, supplied as a free flowing powder.Chemical Structure Co-polymer of acrylamide and quaternized cationic monomer.Principal Use Flocculant for conditioning a variety of municipal and industrial substrates prior tomechanical or static solid/liquid separation.Zetag® 8167 G is ideal for demanding applications that require a market-leading low residual acrylamide content.Zetag® 8167 G is “Generally Recognized As Safe” (GRAS) for use in processing recycled food solids for animal feed. When utilized in the solids recovery process, the maximum uselevel of Zetag® 8167 G, is 1% by weight of dry recovered solids. The maximum level ofrecovered solids in the final animal feed product is 30%.Benefits Highly effective across a wide range of applications (e.g. mechanical dewatering andthickening, flotation and clarification) and a wide pH range (4–9).Typical Properties Appearance Off-white powderBulk density Approx. 0.7 g/cm³pH of 1 % solution at 25 °C Approx. 3.6 – 4.6Residual acrylamide < 500 ppm Recommended Zetag® 8167 G solution concentrations of 0.1 – 0.3 % maximum should beused due to the high viscosity of the make-up solutions. Solution concentrations in excessof 0.3 % should only be considered with polymer preparation systems that provide sufficientmixing and polymer aging times. For best results, the solution should be used within 5 daysto avoid any potential loss in product performance.
Storage Under normal storage conditions within the range 0–35 °C, the product is stable for at least24 months. Storage outside the above specified temperature range for long periods mayadversely affect the product and should thus be avoided.Shipping & Handling As with all cationic polyelectrolytes the product exhibits toxicity towards fish.It is important that precautions are taken where the product may come into direct contactwith fresh water sources, including streams and rivers.Corrosion towards most standard materials of construction is very low. Stainless steel,fiberglass, polyethylene, polypropylene and rubberized surfaces are recommended. In somecases aluminum surfaces can be adversely affected.Packaging details are available on request from your local sales representative.Product is very slippery when wet. Please refer to the relevant Safety Data Sheet (SDS) formethods of removing the polymer.Technical Service Local sales representatives and field service technicians are available to give advice andassistance in the running of laboratory tests and machine trials to select the correct productand determine the optimum application conditions.Health & Safety Detailed information on the product described in this document can be found in the relevantSafety Data Sheet (SDS).Contact For further information please contact your regional office,Note The data contained in this publication are based on our current knowledge and experience.In view of the many factors that may affect processing and application of our product, thesedata do not relieve processors from carrying out their own investigations and tests; neitherdo these data imply any guarantee of certain properties, nor the suitability of the product fora specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc.given herein may change without prior information and do not constitute the agreed contractual quality of the product. It is the responsibility of the recipient of our products toensure that any proprietary rights and existing laws and legislation are  observed.

Anionic polyelectrolyte powder works by interacting with positively charged particles or molecules. It can destabilize colloidal suspensions by inducing flocculation and precipitation