The DRB200 thermostat ideally complements the Hach reagents (COD, TOC, Test 'N' tube). Two separately controllable heating blocks enable cuvettes and reaction vessels to be digested at identical or different temperatures and time settings. The heating blocks heat from ambient to 150 degrees in less than 10 minutes. The DRB200 has a digital timer with an automatic switch-off and acoustic signal and the two transparent splash protection lids close the thermostat while it is heating. The integrated anti overheating feature and the insulated external shell provide additional safety. The reactor will emit an audible signal and automatically shut down at the end of the run. The reactors only support the 13mm diameter TNTplus vials and the 16 mm Hach chemistry vials.
The simple solution for standard and special digestions.
15 vials x 16 mm (single block) 230 Vac
- Easy-to-use and fast
- Safe to operate
- Versatile
- Accommodates Most Test Vials
- Select the Dual Block Model for Simultaneous Digestions
Easy-to-use and fast
The Hach DRB 200 Dry Thermostat Reactor provides unique one-key operation. Programs for Hach procedures with digestion are preprogrammed into the instrument. And it’s fast—the block heats from 20 to 150°C in less than 10 minutes.
Safe to operate
The fully insulated heater block of the DRB 200 reactor means there can be no skin contact with the heater block. Temperature safeguards are provided to prevent overheating. The lids are transparent and lock do deter premature checking of the progress of the reaction. And the reactor will emit an audible signal and automatically shutdown at the end of the run.
Versatile
Use the DRB 200 reactor for digestions for metals analysis, digestions for nutrients analysis, or culture biological samples. Control temperatures in the reactor from 37 to 165°C in 1°C increments. In addition to preprogrammed digestion methods, use the reactor to program and store up to three custom methods.
Accommodates Most Test Vials
The DRB 200 reactor can heat solutions in round vials of two different sizes. Small, 16-mm diameter vial wells are suitable for Hach COD, UniCell™, TOC, and Test ’N Tube vials. Larger, 20-mm diameter vial wells are intended for sample preparation reaction vessels using the Metals Prep Set.
Select the Dual Block Model for Simultaneous Digestions
Two heat blocks in the DRB200 Dual Block Models reactor give the operator independent control of two temperatures and durations. Use this option to run two programs at the same time. A Single Block DRB Reactor cannot be upgraded to a Dual Block Model at a later time.